The GMC Sierra MultiPro has six functions, including two load stops and a 375-pound step for loading gear before a trip from Hot Springs to Lake Hamilton. That 375-pound rating includes your weight and the weight of anything you carry as you step into the bed. Folding both gate panels down in easy-access mode lets you stand nearly 7 to 9 inches closer to the Sierra’s bed floor.
- The Sierra MultiPro tailgate uses two hinged panels for six functions.
- The MultiPro step is 48 inches wide and supports up to 375 pounds including a person and carried gear.
- MultiPro easy access brings you nearly 7 to 9 inches closer to the bed floor.
- MultiPro load stops work at two heights, one at bed-floor level and the other for an upper-tier load.
How much weight can the Sierra MultiPro step hold?
The full-width MultiPro step is rated for 375 pounds, including the person using it and any gear they carry. A 220-pound person with a 45-pound tackle crate puts 265 pounds on the step. That leaves 110 pounds between the example load and the rating. The same calculation applies to a contractor climbing into the bed with a toolbox before a Highway 70 job.
Sierra MultiPro step and grab handle
The step spans 48 inches and folds out after the primary gate and the inner gate are lowered. GMC also describes a fold-out grab handle from the cargo-box wall. At the Lake Ouachita ramp, the full-width step gives you more places to put a foot when moving between the ground and gear in the bed.
How does the Sierra MultiPro make the bed easier to reach?
Easy-access mode positions you nearly 7 to 9 inches closer to the bed floor by lowering the inner section of the already-open tailgate. The outer gate stays down while the smaller panel folds out of the way. That shorter reach is useful for a wet cooler or a tool case sitting just forward of the tailgate.
Sierra MultiPro easy-access position
A pickup used for fishing gear at Lake Catherine gets two different benefits from those panels. Easy access shortens the reach to gear you can lift from the ground, while the fold-down step lets you climb into the box for items closer to the cab. The GMC Sierra 1500 features include other ways the Sierra stores and carries equipment.
How does the Sierra MultiPro handle long cargo?
The MultiPro raises a stop at the end of an open primary gate for bed-floor cargo and provides a second stop above it for upper-tier cargo. The lower stop adds an upright edge when hauling a long board or paddleboard. With the main gate closed, the smaller gate and stop can support a second tier above tools or other shorter cargo in the box.
Sierra MultiPro upper-tier loading
GMC’s two-tier bed design can take a platform across the box for that upper load. A load of boards collected in Hot Springs Village can sit on the upper tier with tool bags below. Both load-stop positions work with properly secured cargo. The 2026 Sierra 1500 towing page covers truck and trailer ratings when the load needs a trailer of its own.
Can I open the Sierra MultiPro with a hitch installed?
GMC warns against dropping the inner gate with the primary gate down when a hitch ball or trailer is attached. The inner panel swings into the area occupied by the hitch hardware. That is the important clearance check when gear is being moved around a Sierra with a boat trailer attached at Lake Hamilton.
Sierra MultiPro inner-gate lockout
On equipped trucks, Inner Tailgate Lockout keeps the smaller panel closed while the main gate can still open. GMC places the setting in Doors and Locks on the center display. This is useful when a receiver-mounted hitch stays on the truck between trips up Highway 270. A GMC test drive gives you a chance to try the separate buttons and gates on a truck with MultiPro.
Which Sierra 1500 trims should I look at for MultiPro?
GMC lists the six-function MultiPro for the 2026 Sierra 1500 lineup. A truck’s actual equipment determines whether the two-panel gate is on it. The 2026 Sierra 1500 trim levels cover the interior and equipment choices, and our new GMC inventory lets you find a specific Sierra by trim.
Sierra MultiPro cab and bed choice
GMC offers a 2026 crew cab from Pro through Denali Ultimate. Double Cab is offered on Pro, SLE and Elevation, and Pro also comes as a regular cab. That matters if the truck needs a four-door crew cab for trips through Hot Springs National Park and a cargo box for work the rest of the week.
Sierra MultiPro at Allen Tillery Buick GMC
Allen Tillery Buick GMC is at 4573 Central Avenue, Hot Springs, AR 71913. Contact Allen Tillery Buick GMC for a truck with the gate and cab you want to see. The GMC financing page offers a way to start a finance application once you have a Sierra in mind.
Frequently Asked Questions
Can the Sierra MultiPro be a work surface?
Yes. The primary gate stays latched and the smaller gate folds down at a higher working height. It gives you a place to set out tools or work on a tackle box.
What are the six GMC MultiPro positions?
Primary gate, primary gate load stop, easy access, full-width step, inner gate load stop and inner gate work surface. GMC builds them from the two hinged panels.
How much can I carry on the MultiPro step?
The step supports up to 375 pounds total, including your weight. A 230-pound person carrying a 50-pound case would put 280 pounds on it.
Can I open just the main Sierra tailgate?
Yes. The outer gate has its own release. The model’s two release buttons can sit beside each other or one above the other.
Can I leave the inner MultiPro gate locked?
On equipped trucks, Inner Tailgate Lockout keeps the inner gate shut while letting the outer gate open. The vehicle’s center display has the setting under Doors and Locks.
By Allen Tillery Buick GMC
Call (501) 881-4160 for vehicle availability and appointments.